Products & Services
Description of Extra Services

STRIP, SEAL & WAX TILE FLOOR

First floors are stripped, thoroughly washed and dried, then 2 coats of protective sealer and 2 coats of wax are applied. Floors are always allowed to dry completely between each coat. The floors are then buffed using a Clarke Ultra Speed 2000 DC electric high speed buffer that produces a brilliant high-gloss “wet look” shine. Matte finish is also available if requested.

BUFFING FLOORS

First floors thoroughly washed and dried. The floors are then buffed using a Clarke Ultra Speed 2000 DC electric high speed buffer that produces a brilliant high-gloss “wet look” shine. The dust control (DC) models are Clarke Green Certified. This new line of Ultra Speed® Burnishers are ideal for use in hospitals, schools and areas requiring dust-free, odor free, quiet operation

NOTE-Please keep in mind buffing can only be done provided there is ample wax on the floor. If not, then the above service is done using 4 coats of wax instead of 2 sealer & 2 wax.

POWER SCRUB CERAMIC TILE / CEMENT FLOOR

Using a 2 speed power scrubber, floors are scrubbed with the appropriate pad for the floor type. All dirt and water are then removed with a high power wet/dry vac. The floors are again damp mopped and dried paying extra attention to get right into the corners.

STEAM CLEAN CARPETS

A commercial grade truck mounted unit (CDS OverDrive™ 4.8 by Hydra Master) or a portable unit (200PSI

Ninja hot water extractor by Esteam) are used as access allows.The truck mounted CDS Overdrive unit has

new power train and drive technology which increases vacuum performance by 25%, while lowering gas consumption 25% to 30%. The recovery tank and vacuum breaker designs have further increased usable

airflow for dramatically improved water recovery. Carpets are left cleaner and drier! The Esteam CSA-US approved 200 PSI NINJA portable extractors are the world’s most popular extractors with performance and reliability like no other.

WINDOW CLEANING In & Out

We use a water feed pole system by Tucker Pole. First a pre soak agent is used, then soap is applied and scrubbed with a soft brush and finally rinse and dry agent is applied leaving a no streak finish.

BLIND WASHING

Blinds are taken down, power steam washed outside, hung to dry and reinstalled.

PRESSURE WASHING

A portable 11hp pressure washer is used taking care to use the appropriate nozzle for the surface being cleaned.

OFFICE HOURS Monday to Friday 9-5